As Black Myth: Wukong continues to dominate the Steam charts—holding the global top-seller position for the fifth consecutive week and the best-selling title in China for eight weeks straight—more and more players are diving into the game. However, many are finding that their current setups might not be powerful enough to run it smoothly. With these concerns in mind, it’s crucial to understand what you’ll need to fully enjoy this experience.
Black Myth: Wukong Minimum System Requirements for PC
First of all, you must have a 64-bit CPU and a Win10/11 operating system. If you are going to play Wukong at a standard mode, you can follow the system requirements below:
- CPU:Intel Core i5-8400 or AMD Ryzen 5 1600
- Graphics Card:GTX 1060 6GB / RX 580 8GB
- Memory:16GB RAM
- Storage:130GB SSD
With this configuration, you can experience the game at 1080p on medium settings without ray tracing enabled.
Black Myth: Wukong Recommended System Requirements for PC
Same as the above, you must have a 64-bit CPU and a Win10/11 operating system.
- CPU: Intel Core i7-9700 or AMD Ryzen 5 5500
- Graphics Card: RTX 2060 / RX 5700 XT
- Memory: 16GB RAM
- Storage: 130GB SSD
At 1080p on high settings, the game visuals are more detailed.
Black Myth: Wukong Optimal Experience System Requirements for PC
You can have the optimal experience of 4K with Full Ray Tracing & DLSS 3. Still, you’ll need at least a 64-bit CPU and a Win10/11 operating system. Then what you’ll require is:
- CPU: Intel Core i7-9700 or AMD Ryzen 5 5500
- Graphics Card: RTX 4070 or RX 7800 XT
- Memory: 32GB RAM
- Storage: 130GB SSD
In fact, a basic 16G RAM is sufficient, but 32GB RAM helps the game run more smoothly. Also, if you want to turn on 4K with Full Ray Tracing, it’s better to go with NVIDIA’s graphics card.
Black Myth: Wukong System Requirements for PS5
Since the PS5 is a fixed hardware platform, games running on the PS5 don't require system requirements like those on a PC. The PS5's hardware performance is consistent, so as long as a game is released on the PS5 platform, it will automatically adapt to the PS5's hardware capabilities, without the need for specific system requirements like on a PC.
You just need to ensure that your PS5 has enough storage space to install the game. The PS5 system will automatically adjust graphics and performance settings based on the game's optimization.
To smoothly play Black Myth: Wukong on your PS5, especially if you're aiming for 4K resolution and high frame rates, your TV should meet the following requirements:
- Resolution: The TV should support 4K resolution (3840 x 2160) to fully utilize the PS5's 4K gaming capabilities.
- Refresh Rate: Ideally, the TV should support a 120Hz refresh rate, which allows for smoother gameplay in games that support higher frame rates.
- HDMI 2.1: Ensure your TV has an HDMI 2.1 port. This supports higher bandwidth, enabling 4K at 120Hz gameplay, and supports features like dynamic HDR, VRR (Variable Refresh Rate), and ALLM (Auto Low Latency Mode).
- Low Input Lag: The TV should have a low input lag mode, especially in game mode, to reduce response time and provide a better gaming experience.
- HDR Support: The TV should support HDR10 or Dolby Vision to deliver richer colors and better brightness contrast.
Other FAQs about PS5 Running Black Myth: Wukong
Can I enable motion smoothing?
It's best not to. Enabling it can increase input lag, causing unresponsive controls, screen tearing, ghosting, and frame drops.
Can I enable 240Hz refresh rate?
No, it won't improve the smoothness of the gameplay and may actually reduce image clarity.
How can I make Black Myth: Wukong run more smoothly?
Choose the "Performance Mode" in the game's graphics settings to achieve 60Hz. Also, in the PS5 settings, enable VRR (Variable Refresh Rate) and turn on "Apply to Unsupported Games" to prevent screen stuttering and tearing.
Can I play on a projector with the PS5?
Yes, but the experience isn't great. Most projectors aren't optimized for low input lag, leading to unresponsive controls, and the projected image quality is often poor.
What if You Have A Capable PC as well as A PC5?
A lot of enthusiastic gamers have both a high-performance PC and a PS5, and even some have bought two versions (on PC and PS5) just to compare and get the best experience of Black Myth: Wukong. That’s where a KVM comes in. It’s designed to switch between multiple hosts on one screen or across multiple screens.
For your PC, it’s suggested that you choose a DP port KVM since DP 1.4 ports are more dominated on some advanced graphics card developed by NVIDIA and AMD. Here’s a TESmart’s DP 1.4 KVM switch for you to enjoy your journey to the west.
DP 1.4 Dual 8K@60Hz KVM Switch Gaming Dock for 2 PCs 2 Monitors, w/ EDID, G-Sync FreeSync
You can check the product link to see other information about this KVM switch. But here, I’d like to talk about how it supports your gaming experience.
First of all, it features 2+2 DP 1.4 ports, allowing you to switch between two PCs. Since DP 1.4 provides a maximum bandwidth of 32.4 Gbps, it allows for higher resolution and refresh rates. It supports resolutions up to 8K (7680×4320) at 60Hz and 4K (3840×2160) at 120Hz, which definitely can run your Black Myth: Wukong at high-res and fps.
It also includes support for High Dynamic Range (HDR) video, offering better color and contrast while you’re engaging in your fights with all the bosses. Additionally, this KVM is enhanced with four technologies: G-Sync, FreeSync, FEC, and DSC, and compatible with Nvidia and AMD graphics cards, ensuring stable, tear-free, and ghost-free gaming visuals.
HDMI 2.1 is the top choice for gaming consoles like the PS5 and Xbox Series X. With a 48 Gbps bandwidth, it supports 8K at 60Hz and 4K at 120Hz, offering features like VRR, ALLM, and eARC. These enhancements reduce screen tearing, minimize latency, and deliver superior audio, making HDMI 2.1 perfect for modern gaming console setups.
Still, you can check the product link to see other information if you’re interested in other features. I’m going to show you how it supports your gaming experience.
This HDMI 2.1 KVM switch is perfect for gamers, supporting true dual 8K@60Hz output with an ADI chip that ensures stable performance, avoiding issues like screen flicker or blackouts.
It also supports dual 4K@144Hz/160Hz gaming, enhanced by DSC 1.2a technology, and features Dynamic HDR (HDR10+, Dolby Vision), VRR (G-Sync, FreeSync), FVA, and ALLM. These technologies guarantee a stable, tear-free, and ghost-free gaming experience, compatible with Nvidia and AMD graphics cards. With HDMI 2.1’s 48Gbps ultra-high-speed bandwidth, it not only supports up to 8K@60Hz but also 4K@144Hz resolutions, delivering exceptional visual quality.
